Yazılarımız

How do I reset my drum HL 2130?

How to reset the drum counter:

  1. Make sure the machine is on, then open the front cover.
  2. Press and hold the "Go" button for about 4 seconds or until all the LEDs light up.
  3. Release the "Go" button and close the front cover.
  4. If the drum light is off, the drum unit is reset.

1 Mar 2021

How do I reset my Brother printer HL?

Use the following steps to reset the machine:

  1. Unplug the interface cable if selecting Network or All Settings.
  2. Press Menu.
  3. Press the UP OR DOWN ARROW key to choose Initial Setup. …
  4. Press the UP OR DOWN ARROW key to choose Reset. …
  5. Press the UP OR DOWN ARROW key to choose the reset function you want to use.

How do I reset my HL?

HL-L8260cdw

  1. Open the printer as if you're going to take a toner cartridge out.
  2. With the front open, press SECURE and CANCEL buttons together at the same time.
  3. The reset menu appears on the LCD display.
  4. Use the menu to select the colour and yield you need to reset.
  5. The LCD display shows "ACCEPTED" if the reset was successful.

How do you change the toner on a Brother HL 2130?

0:432:09Brother HL 2130 Instructional Video – YouTubeYouTubeStart of suggested clipEnd of suggested clipSet the assembly on a piece of paper or plastic to protect the surface. Then press the small leverMoreSet the assembly on a piece of paper or plastic to protect the surface. Then press the small lever to release the brother HL 2130 toner cartridge and pull it up and out.

How do you clean a Brother HL 2130?

Take out the drum unit and toner cartridge assembly….Clean the Drum Unit.

  1. Prepare blank A4 or Letter size paper.
  2. Make sure the machine is in the Ready mode.
  3. Open the front cover and the back cover (face-up output tray). …
  4. Press the Go button five times.
  5. Close the front cover. …
  6. Open the manual feed slot cover.

How do you check the toner level on a Brother HL 2130?

How To Check Toner Level on Brother Printer

  1. Double-click on your printer icon (it's down in the task tray) to open the Brother Status Monitor Utility.
  2. Your ink and toner levels will be displayed.

19 Jan 2021

How do I reset my Brother HL L2305W?

Brother HL-L2305W Toner reset Procedure Hold the 'GO' button down while turning the printer on. After 3 seconds release the 'GO' button. "USER MODE" will appear. Press the "GO" button NINE times.